The water softener eliminates all the contaminants and extra minerals from the water. It turns hard water into soft water. The minerals are harsh not only for consumption but also for the water softener. If there is no servicing for the water softener, the mineral accumulation will make the machine dysfunctional. Therefore, timely servicing from RO service near me in Kanpur.

Use the Correct and High-Quality Salt 

The water softener has resin beads that carry out the ion-exchanging process. The ion beads need to get recharged from time to time to carry out the ionisation process. Here is where the salt comes in. The salt solution in the brine tank recharges the beads.

One can get three types of salt- rock salt, solar salt and evaporated salt. The evaporated salt avoids the formation of salt bridges and salt muck that can muck up the water.

Expert Service Means No Salt Bridge 

Call the water purifier service in Kanpur to service the water softener when you see a salt bridge. Generally, a salt bridge occurs when the brine tank gets overfilled with salt. It leads to humid temperatures and moisture; this, in turn, causes the salt pellets to stick together and form lumps and crust inside the tank. 

Proper maintenance ensures that there are no lumps. Replacing the salt too frequently also leads to the shape of a salt bridge. Get an expert to fill the tank. You will see they never serve past the two-thirds of the way to the top.

Then they would wait for the softening system to deplete some salt. After the salt gets exhausted, they will add more salt. The ideal time to fill the brine tank is about ¼ full. Just like overfilling, underfilling also not recommended. Ensure that the salt level never drops below the water level in the tank. The salt must be at least three inches above the water level.

What to Do If Salt Bridges Still Form?

In case the solutions mentioned above the salt bridge is still forming in the tank, call the water softener expert. They will select the suitable salt that goes in your tank. Not every water softener tank is compatible who every kind of salt.

One mustn’t mix more than one type of salt. The salt crystals come in varied shapes, which could also lead to the formation of bridges. If bridges are already there, it will accelerate the bridge formation. 

Experts recommend using evaporated salt that gets dissolved and treated. Heat gets used to treat the salt as it eliminates all the moisture. There is no insoluble material in the salt as it is highly pure. The evaporated salt pellet gets widely used in water softeners and is less likely to cause the formation of salt bridges. On the other hand, mineral salt will form salt bridges. 

Clean the Brine Tank

The service provider has experts who thoroughly clean the water softener’s brine tank. It is an essential maintenance hack that ensures the long life of the water softener. Avail of this service once a month. It will ensure that the water softener works at its highest capacity. Not cleaning the tank for a long time will lead to clogging and salt mushing.

Clean it out when you notice discoloured water and a foul smell. It protects the system’s lifespan and keeps the water soft for a long time. Use only high-quality pellets to maintain the brine tank free from salt deposits. 

It is essential to drain and clean the brine tank once a year. The service provider will scrub any salt accumulation and build-up inside the tank. Then the tank will get filled with fresh salt and water. Add a softener in intervals to keep the resin beads clean and functional.

Decide the Settings of the Water Softener

Automatic water softeners have adjustable settings that decide the demineralising water process. Each frequency controls the rate of demineralisation. If you cannot figure it out, contact the expert who will put the water softener in the correct system settings per your needs. 

The regeneration frequency depends on the use and the quality of the water. The regeneration time refers to the period when the water gets softened. Request the service provider to set the timer at a time when you will not use the water softener.